Samsung Galaxy A7 (2017) Take Apart Repair Guide - RepairsUniverse By Repairs Universe
Samsung Galaxy a7 2017 take apart repair, guide, warning you're performing this repair at your own risk. We claim no responsibility for any damages that might occur to perform this DIY repair. You will need a plastic triangle: opening tool, nylon, spider, SIM card ejection tool, fine tip curved tweezers precision, knife set premium, 2, millimeter, red adhesive, roll multipurpose heat gun, Phillips screwdriver, playing cards, power down your 2017 Samsung Galaxy a7, eject the SIM card and micros card from the top of the smartphone. Remove the SIM card tray from the side of the Samsung phone. The Galaxy a7 rear 3d glass panel is glued on solidly and is a tight fit within the frame. Apply heat to soften the adhesive with the precision knife create enough space to insert a playing card attack.
This sticky adhesive by carefully dislodging the rear glass panel from the chassis, remove the following: 17 Phillips screws pry up the plastic shield that covers the top of the motherboard extract, the wafer-thin assembly that includes the NFC antenna and loudspeaker. Remove the plastic shield that covers the bottom of the Galaxy a7 motherboard, starting with the Galaxy a7 battery connector, detach the bevy of cables from the motherboard, remove the following: Philips crew sludge up the motherboard and remove it from the smartphone detach the impressive 16 megapixel Galaxy a7 front-facing selfie camera flip the motherboard over and remove the 16 megapixel rear facing camera. The 2017 Galaxy a7 battery is well wedged and adhered in place use the triangle opening tool, the muscle, if free from the adhesive securing it to the mid-frame extra, keep the long-lasting 3600 William per hour battery, remove the falling Phillips screw pluck out the modular 3.5 millimeter headphone jack. Remove the spring contact connected. Vibrator uses the tweezers to pry up the 2017 Galaxy a7 volume, buttons, cable, the next two components to surrender are the proximity sensor and earpiece speaker.
Remove the power button cable from the side of the mid-frame. The 5.7-inch Galaxy a7 display assembly is glued on solidly to the mid-frame. Apply heat to soften the adhesive. With the precision knife create enough separation to insert a playing card, use the playing card to attack the adhesive, take your time and apply additional heat as needed once you've sliced through the adhesive, be mindful of the home button and the cables for the bottom buttons. When decoupling, the 2017 Galaxy a7 screen from the mid-frame peel up and remove the bottom button, LED cables, followed by the Samsung Galaxy a7 modular home button and fingerprint sensor, make sure to take a look at our other DIY smartphone and tablet repair.
Tutorials, don't forget to subscribe to our YouTube channel like us on Facebook and follow us on Twitter.
Source : Repairs Universe
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
