Samsung Galaxy A51 5g Charging Port Replacement By Geardo
Hi everyone welcome back to do. Today we will show you how to replace the charging port flex on the Samsung Galaxy a51 5g version. To start. We need to have the right tools to proceed with the repair which you can find in the description first take out the sim tray and then the back cover removal to remove the back cover. It needs to heat gently around the back coverages until the pasted adhesive becomes soft. For this we are using a heating pad place, the back core side on the heating pad and select the mobile phone heating option and leave it till it completes.
Alternatively, you can use a heat gun or hair dryer once the heating has completed, use a suction cup to create an opening between the frame and rear cover. Next insert a plastic carburetor tool or something similar to cut the adhesive around the back cover next take out the back cover and take out the main board frame with the wireless coil by undoing screws, undo, nine screws and then using a pry tool, lift the wireless coil by cutting the adhesive under it. Next move to the bottom section and take out the second PCB cover by undoing eight screws. Next take out the cover and undo the screw, securing the secondary board next disconnect the touch ID camera main ribbon flex and LCD flex connectors next disconnect the secondary board connection cable from the logic board. Next take out the secondary board, including the charger port, apply the heat and soften the glue under it, be gentle in this process and take out the board using a pry tool.
Next replace the broken charging port with a new unit and place it on the board. Next secure the new secondary board, including the charger port by adding the screw next connect, the LCD plug main ribbon flex and touch ID camera into the secondary board next place. The secondary cover by adding eight screws next place the main board frame with the wireless coil to the body secure the frame by adding nine screws before installing the main back cover make sure it has enough glue on it if not use, b7000 glue or new double-sided back cover adhesive. Finally, we are adding binding clips to tighten the rear car with the body. If not, you can use some rubber bands and leave them for some time.
Hope you have enjoyed the replacement guide. Let us know if you have any questions, please like share and comment on. Our videos hit the subscribe button for more videos.
Source : Geardo
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
