Moto G Stylus How to insert SIM,SD Card Like ABC By Varieties Teck
Hello and welcome one too, where it's taken to be back again for another video in today's video we have a quick tutorial: how to install the sim card and the SD card for your Moto G stylus. You will be surprised that a lot of people don't know how actually insert the SIM card in the right way and a lot of people indeed jammed the sim card in and damaged the phone. Don't worry in this video I'm going to show you step-by-step as 1-2-3 how you can install it in the safe way without any further ado, let's find out now. First, you want to make sure that you have the sim ejector tool. Something looked like this normally search in the box. You must find something like this.
This is basically to inject the SIM card of the five. You don't have. Don't worry, you can just use like a pin or a needle, and it should do the same thing now. The sim tray actually on the Moto G stylus, located on the left side, and you get to see actually a hole over here and then here is the SIM tray. As you guys can see, you should be able actually to feel it now what you need to do to inject it I mean I highly recommend, always especially if you are inserting a memory card or a SIM card to turn off the phone and what you need to put that actually same ejector tool inside this hole and just push it should actually pop up and then in your finger.
You can just pull it out. Let's take this here and now, if you guys can see, the SIM card number actually come in the top, and when you insert the SIM card, you make sure this side is up now the SIM card, it's not gonna, go actually a wrong way. It's not going to fit. Actually, even if you're going to try to do it, it's not going to fit on the edge or the corner over here, you'll see like a certain cut out actually to make the SIM card v hundred-percent. So when you insert the SIM card, you make sure that the SIM card hundred-percent flat, it must be a hundred percent flat other than that it might actually jam N, or maybe you're trying to push little hard.
You ended up break and actually the synth uses a plastic, and it's very fragile, easy to get bent or actually break now, the other a place for the memory card, and you always if you look to the memory card- and you will see that has the same shape and the same tray just like this and the memory card, sometimes pain in the butt, sometimes just make sure goes actually flat. There you go when you make sure that both actually fit hundred percent, and when you put your finger over here, you shouldn't feel that anything actually elevated. They must be 100 percent flat, as you guys can see. Now, keep this side up, go to the phone and just insert the SIM and the memory card and be gentle once you're trying to push it gently. If it doesn't work, actually don't push hard, because that might actually break the tray or may be jammed the SIM card inside the phone, and then you're going to have a big problem over here.
It should be able just like this and should be working fine for you. If, if it doesn't work me, and you did something or maybe the SIM tray or the same reader and the phone has a problem because, as you guys skiing once I put it back, the 4G LTE start popping. That means I did it correctly and then even the SD card. This show tells you that you have a SD card over here. That means the SD card is correctly inserted in the cell phone and the SIM card, some phones, you might need to restart, to get the signal back, so you can do that, but, as I said, I highly recommend always to turn off your phone and do this a process turn your phone back on and see.
If everything works, just fine I wish you guys find this video ? or that tutorial helpful for you. If it did thumbs up subscribe, hit the bell and Union, you will be notified when I upload videos in the future. Thank you. So much again for watching, and I'll see you in the next video.
Source : Varieties Teck
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
