Inserting SIM and MicroSD Card in WIKO Pulp FAB By HardReset.Info

Here I have a couple club and let me show you how to insert micro, SD and micro SIM card on the following phone. First hold down the power key for a few seconds, then tap power off and choose ok to confirm the whole operation wait until your phone is completely switched off and afterwards you have to find the cavity at the right edge of your phone and simply use your nail finger to open the whole item. Let's do it step-by-step from the bottom of your device to the top, and now we have access to your slots at first. Let's remove the battery now, let's install memory card in that case is, of course, micro SD card with the characteristic edge right here and simply put this card in the first slot. Let's do it that way make sure it's pushed to the end, and now, let's insert a micro SIM card here, I have one of the following card of the characteristic edge right here and simply put this card in the middle slot. Well done now, you can put back the battery.

Let's do it properly. Let's insert the back cover and let me switch on my device to check if both cards are working properly. The Vice smartphone is switching on wait, a few seconds exit. Let's unlock the screen, find and select settings scroll down and choose SIM cards. As you can see, the device is reading our SIM card.

So it's a good sign, let's scroll down again and choose storage, and you may observe from the following information that the device is reading our SD card. So everything went well. Thank you for watching. Please subscribe our Channel and leave thumbs up under the video.

Source : HardReset.Info