Samsung Galaxy S20 FE 5G Camera Replacement By Geardo
Hi everyone welcome back to do. Today we will show you how to replace cameras on the Samsung Galaxy s20 due edition. To start, we need to have the right tools to proceed with the repair which you can find in the description first take out the sim tray and then the back cover removal to remove the back cover. You need to heat gently around the back coverages until the pasted adhesive becomes soft. For this we are using a heating pad place, the back core side on the heating pad and select the mobile phone heating option and leave it till it completes. Alternatively, you can use a heat gun or hair dryer once the heating is completed, use a suction cup to create an opening between the frame and rear cover.
Next insert a plastic carburetor tool or something similar to cut the adhesive around the back cover next, take out the background and take out the main board frame with wireless coil by undoing screws, first undo, nine screws and then using a pry tool, lift the wireless coil by cutting the adhesive under it while racing be gentle, first, lift the frame and then disconnect the wireless coil and then the battery plug before taking off the pad and frame next plot. The main logic board by undoing one screw and unplugging three antennas and the main flex cable then pull out the board by using a tweezer or pry tool. Galaxy s20 FM comes with three rear cameras and one front camera. First, on the front side of the logic board, disconnect the broken front camera and then unplug the broken white and ultra white cameras. Next disconnect the broken telephoto camera model on the rear side of the logic board.
Next replace the required to be broken camera with a new unit and place it on the logic board. Next, connect the cameras back and secure the logic board by adding the screw and then connect three antennas and the main flex cable into the logic board. Next secure the battery connector and place the main board frame with the wireless coil to the body make sure the wireless square plug connects with the body by pressing on top of it and then secure 9 screws on the main board frame before installing the main back cover make sure it has enough glue on it, if not use, b7000 glue on your double-sided backup adhesive. Finally, we added binding clips to tie in the rear car with the body. If not, you can use some rubber bands and leave them for some time.
Hope you have enjoyed the replacement guide. Let us know if you have any questions, please like share and comment on. Our videos hit the subscribe button for more videos.
Source : Geardo
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
