REDMI 9T CAMERA LENS REPLACEMENT!! SO SIMPLE By Thepcphone
Hello everyone, as you can see here, the Xiaomi m1903 f10 Z. This is called a Xiaomi 90. As you can see, the camera lens is broken accidentally, somehow it's broken, and we must need to replace the otherwise. The picture. Quality comes very poor by the way this is the replacement I, bought it from eBay for five British pounds, okay, and it took about seven days to come from Spain to London. So now we're going to turn it off and replace it.
Okay, I need to enter the pin now we're going to turn it off. Let's check the models in any way, because there always is too short model and the complete model. Okay, now we're going to go to settings and check. This is called me 90, as you can see. Okay.
So if you go to settings, then all the way down to you about, then you can see. The phone model number is 90. Okay, so lets it turned off now. I need a hairdryer. I'm going to apply some heat in there.
Okay I kept our sound very low, otherwise it makes a big sound. You know the hairdryer only turn on its similar to over okay, so we'll meet. You have let it on okay, when it's hard to try to use your tweezer or something like that and slowly take it out. Furthermore, you know all those are broken glass, so you need to be very careful. Okay, so I'm looking for the clean one, most thin and skinny so easily.
It goes underneath the glass through the adhesive and I can peel it off. Remember the much more heart, it's easy to kill it off. Okay and when the temperature goes down, is very difficult. Okay, as you can see here, is coming off slowly again, we need to put some more temperature more heat and make sure you got the safety goggle, because you know these small piece of glasses is really dangerous for your eyes. This is a potential hazard.
You know so make sure you have the safety goggles. If you don't have, you can use even some glove, you know whatever it is, but it's better to have one of them. So it's almost taken out I'm cleaning just that healthy I, believe they use. Double-Sided tape is now any other as if to easy to clean. Now we're going to take a brush and give it a clean, as you can see, I'm cleaning it make sure there is no dust because of the lens was broken.
Obviously there were a lot of dust emo send it asked, so I always use this soft brush to clean it off so now, I need to double-check. If there is anything left over, seems everything's clean now, I'm going to take the replacement, and before I put it on I, just use kind of alcohol, alcohol, the cleaner yeah, I'm gonna. Let it dry for a couple of seconds: it's going to dry, and also I'm cleaning the lenses you can see. There are some dust, so this is the actual replacement, I'm going to peel off one side. There is some identical difference in between front side and back side easily.
You can see the back side always comes with kind of white border, so make sure the border goes in. If you make a mistake, then obviously you're going to get a different reflection on the camera. Make sure you do the right thing. I always put like kind of dual sided tape and one double-sided tape they applied just put it on and push it check all the way, give it a small drop, and it doesn't come off as you can see, which is great. It looks clean and floppy I'm going to go back to camera and check.
As you can see, it's quite clear. There is nothing wrong, and we could say successfully the camera lamps glass shield already taken out and replaced. So that was a simple attempt to be honest and simple: rapier I hope you don't have any question, but if you do have any, please don't forget to leave a comment below, and please do subscribe. So in that way you can have some more future videos and I can get to 1000 subscribers. That is the minimum target from now on.
So thank you. So much for watching and I hope. I'll see you in the next video bye for now.
Source : Thepcphone
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
