Hi, everyone I'll show you how to replace those back glass and your UHF see you at 11:00, so be really careful. Once you stick your knife, there's a bunch of cables around. You can easily Cod them so just hit it up pretty good, get up and just start from one of the corners and don't go to a dip and just start from this corner and then lift it up and use this. Something like plastic, be super careful because don't stick too much in you have some cables going pretty close to okay. Now, let's try to lift it up. Let this stuff up! Okay came off now you can pull it and here's your camera gloss.
You'll need to remove it to join so your back cover, so I or if it's broken, you can actually replace it. So just add some heat. If you need to it'll, come up pretty easy, and you're. There are two pieces: okay, so there are two pieces: remove them replace two, a new back cover, so here's a new one. It's super easy! Stick it back in add some glue if it needs to be and insulate back in your phone.
It is pretty simple here: it is all installed, gold it around the press on it make sure everything is good, just like new phone thanks for watching. You feel like this video please like and subscribe, like you said, be super careful once you remove this because you can easily cut something inside, so it doesn't go too deep in or just stay out of it as much as you can just go around the edges. Thanks for watching bye.
Source : all about phones