How to fix a Samsung Galaxy A70 that’s stuck on Black Screen of Death By TheDroidGuy
When, a smartphone like the Samsung Galaxy, a 70, gets stuck on a black screen of death. There are only a couple of possibilities: either. The problem is with the hardware caused by physical or liquid damage, or it's a minor issue with the firmware that you can fix easily without much of a hassle. This issue occurs from time to time and as long as your phone does not have any signs of physical or liquid damage, you can definitely make it respond again hi. This is Felix from the Droid guy. com and in this video I will show you how to fix Galaxy a 70.
That's stuck on black screen of death. First solution force restart your phone. The first thing you have to do when dealing with a phone that is stuck on the black screen of death is to perform the force to restart. It is a simulated battery removal and will refresh the phone's memory as well as reload all its apps and services. It might be the only thing you need to do to make your phone respond again, and it's very simple: here's how it's done just press and hold the volume down and power keys at the same time until the galaxy a 70 logo appears.
If you are able to make your phone respond, then the problem is fixed. However, if the phone didn't respond or still stuck on the black screen of death after the first try, then do the same procedure a few more times and if it's still not responding after that, then it's a possible problem caused by a drained battery move on to the next solution. Second, solution charge your phone and do the force to restart most of the time. A drained battery is actually not a problem, because most devices would respond immediately once connected to the charger, but the thing is: if the battery was completely drained, it's possible that the firmware crashed just before the phone powered down, because some services and components may haven't been shut down properly. As a result, you are dealing with a couple of procedures that both results to the black screen of death to try and fix this.
Follow these steps plug the charger to a working wall outlet using the original cable connect the phone to its charger, regardless of whether the phone shows the charging symbol or not, leave it connected to the charger for at least 10 minutes, after which, and while the phone is still connected to the charger press and hold the volume down and power buttons at the same time until the Galaxy a7 tee logo appears. However, if the phone is still stuck on the black screen of death. After doing these procedures, then it's it possible that your device has a hardware problem. You must bring the phone back to the store or shop so that a technician can check it up for you. That's it I hope this simple troubleshooting guide has been able to help you one way or the other.
Please subscribe to our Channel and enable notifications, so you can stay up to date with the droid guy. Thanks for watching.
Source : TheDroidGuy
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
