How to Activate Power Saving Mode on XIAOMI Redmi 9T – Battery Power Saver By HardReset.Info
Welcome, my name is a Redmi 9t, and today I'll show you how to enable the power saving mode and to get started, pull down the notification panel and find the battery saver toggle, which for me, is on the second page in the corner right here. So once you find it, you can simply tap on it to enable it, and this will enable the power saving mode. You can also do a couple additional things past this, because, as you can see, it doesn't really do much in terms of saving the power so major that things are still enabled. So, if you want to preserve your battery a little better than the actual power saving mode, what you can do is simply turn off location use only one, either mobile network or Wi-Fi and disable the other. So if you plan to use only, for instance, Wi-Fi right now get rid of the mobile and the second page turn off NFC. If it's not needed uh, if you have hotspot on also disable it, you can also turn on dark mode.
This will increase a little of the battery uh, not by much, though, and if you have location on also disable that additionally uh to extend your battery even further uh. A great way to do it is by dropping your max brightness of your device. I could actually do that. There we go so by dropping it, you will increase your battery further, the brightness by dropping it halfway. You gain several hours of battery life, so it's a perfect trade-off.
In my opinion, now uh, I will mention one thing: when you do not disturb mode isn't or not do not disturb. What am I saying the battery saver mode is enabled your device will disconnect from Wi-Fi and mobile data after a specific period of inactivity when it's in sleep mode, sleep mode, meaning this. So when your device is in this state for several minutes, it will disconnect from those from basically all kinds of networks, and that will result in you not receiving any kind of messages updates. Anything like that. That would require internet connection.
That is because your device doesn't have internet connection in this mode right now, uh. The moment you receive notifications is basically when you unlock your device, it will automatically reconnect and sync everything up that it was missing. So that being said, uh once you're done with the battery saver mode, you can simply tap on it to turn it off, and this will basically bring the device back to normal functioning and if you want some of those toggles back on, then simply tap on them. So that is how you would use the power saving mode here and if you found this really helpful, don't forget to like to subscribe, and thanks for watching.
Source : HardReset.Info
Phones In This Article
Related Articles
Comments are disabled
Latest Articles
